CHAMFER Command On Solids เขียนโดย Vakin Youngchoay , at 03:13, in

คำสั่ง :_chamfer

(TRIM mode) Current chamfer Dist1 = 0.0, Dist2 = 0.0
เลือกเส้นแรก หรือ [Undo/Polyline/Distance/Angle/Trim/mEthod/Multiple]:
Base surface selection…
Enter surface selection option [Next/OK (current)] : OK

Specify base surface chamfer distance: 5

Specify other surface chamfer distance <5.0>: 10
Select an edge or [Loop]: Select an edge or [Loop]: